To get access to your ZyXEL WAP6906, you need the IP of your device, the username and password. You'll find such information in the Manual of your ZyXEL WAP6906 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.
ZyXEL WAP6906 Login Guide
- Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
- Type 192.168.1.5 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
- You should see 2 text fields where you can enter a username and a password.
- The default username for your ZyXEL WAP6906 is admin.
The default password is (blank). - Enter the username & password, hit "Enter" and now you should see the control panel of your router.
If above login credentials doesn't work with your ZyXEL WAP6906 router then try this method
Try different ID/password combinations that are widely used by ZyXEL that you'll find below. In this list are the most popular default username and password combinations used by ZyXEL. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your ZyXEL WAP6906 wireless router.
| # | Username | Password |
| 1 | admin | 1234 |
| 2 | (blank) | 1234 |
| 3 | 1234 | |
| 4 | n/a | 1234 |
| 5 | admin | admin |
| 6 | (blank) | admin |
| 7 | user | 1234 |
| 8 | 1234 | 1234 |
| 9 | admin | (blank) |
| 10 | admin | |
| 11 | (blank) | (blank) |
| 12 | admin | password |
| 13 | webadmin | 1234 |
| 14 | admin | telus |
| 15 | adminpldt | 1234567890 |
| 16 | admin | |
| 17 | supervisor | supervisor |
| 18 | on bottom of router | on bottom of router |
| 19 | (blank) | |
| 20 | admin | Printed on Router Label |
| 21 | admin | last 4 of routers mac address |
| 22 | cht | chtnvdsl |
| 23 | Printed on Routers Label | Printed on Routers Label |
| 24 | admin | 'randomly generated' |
| 25 | (blank) | |
| 26 | admin | abc123 |
| 27 | admin | randomly generated |
| 28 | on sticker under the router | on sticker under the router |
Default login IPs for my ZyXEL router
You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer ZyXEL. Maybe this will work for you.
| # | Default Router IP |
| 1 | 192.168.1.1 |
| 2 | 192.168.1.2 |
| 3 | 192.168.1.254 |
| 4 | 192.168.10.1 |
| 5 | 192.168.0.1 |
| 6 | acquired via DHCP |
| 7 | 192.168.1.1:8080 |
| 8 | 10.0.0.138 |
| 9 | 10.0.0.1 |
| 10 | 192.168.1.11 |
| 11 | 192.168.200.1 |
| 12 | 192.168.3.1 |
| 13 | 192.168.254.254 |
| 14 | 192.168.1.3 |
| 15 | 192.168.1.5 |
| 16 | 10.131.52.162 |
| 17 | 192.168.2.1 |
| 18 | 192.168.80.1 |
| 19 | 192.168.1001 |
| 20 | 192.168.100.1 |
| 21 | 192.168.212.1 |
Nothing of the methods worked for me and I still not get access to my ZyXEL WAP6906!
All you need to do is to reset your WAP6906 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.