Sagemcom [email protected] 4310 Default Router Login

To get access to your Sagemcom [email protected] 4310, you need the IP of your device, the username and password. You'll find such information in the Manual of your Sagemcom [email protected] 4310 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is SAGEMCOM_XXXX .

Sagemcom [email protected] 4310 Login Guide

• Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
• Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
• You should see 2 text fields where you can enter a username and a password.
• The default username for your Sagemcom [email protected] 4310 is admin.
  The default password is (sticker on the bottom of device).
• Enter the username & password, hit "Enter" and now you should see the control panel of your router.

If above login credentials doesn't work with your Sagemcom [email protected] 4310 router then try this method

Try different ID/password combinations that are widely used by Sagemcom that you'll find below. In this list are the most popular default username and password combinations used by Sagemcom. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Sagemcom [email protected] 4310 wireless router.

#	Username	Password
1	admin	admin
2	admin	(sticker on the bottom of device)
3	n/a	n/a
4	admin
5	admin	etdm
6	menara	menara
7	n/a	admin
8	(blank)	(blank)
9	(blank)	printed on back of router
10	admin	0000
11	admin	abcd12345
12		admin
13	admin	gvt12345
14	admin	serial number found on bottom of router
15	admin	sky
16	(blank)	admin
17	Admin	last four digits of the routers MAC address

Default login IPs for my Sagemcom router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Sagemcom. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	192.168.254.254
4	192.168.2.1
5	192.168.1.254
6	10.0.0.138

Nothing of the methods worked for me and I still not get access to my Sagemcom [email protected] 4310!

All you need to do is to reset your [email protected] 4310 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.