Netgear WNR1000v2 - Default login IP, default username & password

To get access to your Netgear WNR1000v2 ( also known as WNR1000 ), you need the IP of your device, the username and password. You'll find such information in the Manual of your Netgear WNR1000v2 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is NETGEAR .

Netgear WNR1000v2 Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
You should see 2 text fields where you can enter a username and a password.
The default username for your Netgear WNR1000v2 is admin.
The default password is password.
Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Netgear WNR1000v2 router default login

If above login credentials doesn't work with your Netgear WNR1000v2 router then try this method

Try different ID/password combinations that are widely used by Netgear that you'll find below. In this list are the most popular default username and password combinations used by Netgear. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Netgear WNR1000v2 wireless router.

#	Username	Password
1	admin	password
2	admin	1234
3	admin
4	admin	admin
5		password
6	comcast	1234
7	attadmin
8	(blank)	password
9	(blank)	admin
10		attadmin
11	admin	(specified by the user)
12	(blank)	1234
13	admin	(blank)
14	admin	changeme
15	n/a	n/a
16	super	5777364
17	superuser	password
18	(blank)
19	mso/admin	changeme/password
20	admin	netgear1
21	attadmin	(blank)
22	(blank)	printed on router
23	voo	WPA key on the label, uppercase
24	admin	setup
25	cusadmin	highspeed
26	(blank)	(blank)
27	cusadmin	(blank)
28	admin	(specified by user)
29		cktadmin
30	superman	21241036
31	n/a	password
32		1234

Default login IPs for my Netgear router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Netgear. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	192.168.0.100
4	192.168.1.250
5	192.168.100.1
6	192.168.0.227
7	192.168.0.101
8	192.168.61.1
9	http://www.routerlogin.net
10	http://www.mywifiext.net
11	192.168.0.233
12	192.168.0.239
13	192.168.0.230
14	192.168.0.228
15	192.168.168.168
16	www.mywifiext.com
17	10.0.0.138
18	172.16.0.1
19	192.168.0.231
20	192.168.1.254
21	192.168.0.229
22	192.168.0.224
23	192.168.1.240
24	192.168.0.237
25	192.168.0.232
26	192.168.0.201
27	192.168.10.1
28	192.168.0.160
29	192.168.0.225
30	192.168.1.251
31	192.168.0.200
32	192.168.15.1
33	192.168.254.254
34	192.168.58.21
35	192.168.1.3
36	192.168.0.102
37	192.168.0.236
38	192.168.0.235
39	192.168.0.202
40	192.168.0.240
41	192.168.0.226
42	http://m.home
43	10.1.10.1

Manuals for Netgear WNR1000v2

Manual

Nothing of the methods worked for me and I still not get access to my Netgear !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.