Netgear DG480 - Default login IP, default username & password

To get access to your Netgear DG480, you need the IP of your device, the username and password. You'll find such information in the Manual of your Netgear DG480 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

Netgear DG480 Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
You should see 2 text fields where you can enter a username and a password.
The default username for your Netgear DG480 is admin.
The default password is changeme.
Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Netgear DG480 router default login

If above login credentials doesn't work with your Netgear DG480 router then try this method

Try different ID/password combinations that are widely used by Netgear that you'll find below. In this list are the most popular default username and password combinations used by Netgear. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Netgear DG480 wireless router.

#	Username	Password
1	admin	password
2	admin	1234
3	admin
4	admin	admin
5		password
6	(blank)	password
7	comcast	1234
8	attadmin
9	(blank)	admin
10		attadmin
11	(blank)	1234
12	admin	(blank)
13	admin	(specified by the user)
14	admin	changeme
15	super	5777364
16	superuser	password
17	(blank)
18	mso/admin	changeme/password
19	admin	netgear1
20	n/a	n/a
21	(blank)	(blank)
22	cusadmin	(blank)
23	admin	(specified by user)
24		cktadmin
25	superman	21241036
26	n/a	password
27		1234
28	attadmin	(blank)
29	(blank)	printed on router
30	voo	WPA key on the label, uppercase
31	admin	setup
32	cusadmin	highspeed

Default login IPs for my Netgear router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Netgear. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	192.168.0.100
4	192.168.1.250
5	192.168.100.1
6	192.168.0.227
7	192.168.61.1
8	192.168.0.101
9	http://www.routerlogin.net
10	http://www.mywifiext.net
11	192.168.168.168
12	192.168.0.233
13	192.168.0.239
14	192.168.0.230
15	192.168.0.228
16	192.168.1.254
17	192.168.0.229
18	192.168.0.224
19	www.mywifiext.com
20	10.0.0.138
21	172.16.0.1
22	192.168.0.231
23	192.168.0.225
24	192.168.1.251
25	192.168.0.200
26	192.168.15.1
27	192.168.254.254
28	192.168.58.21
29	192.168.1.3
30	192.168.0.102
31	192.168.0.236
32	192.168.0.235
33	192.168.0.202
34	192.168.0.240
35	192.168.0.226
36	http://m.home
37	10.1.10.1
38	192.168.1.240
39	192.168.0.237
40	192.168.0.232
41	192.168.0.201
42	192.168.10.1
43	192.168.0.160

Nothing of the methods worked for me and I still not get access to my Netgear DG480!

All you need to do is to reset your DG480 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.