D-Link DIR-882 Default Router Login

To get access to your D-Link DIR-882, you need the IP of your device, the username and password. You'll find such information in the Quick Install Guide of your D-Link DIR-882 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DIR-882 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DIR-882 router default login

If above login credentials doesn't work with your D-Link DIR-882 router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DIR-882 wireless router.

# Username Password
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6n/an/a
7(blank)
8(blank)admin
9admin
10n/a(blank)
11useruser
12admintelus
13(blank)private
14admin<blank>
15rootadmin
16admin 'randomly generated'
17C192.168.0.1
18adminroot
19adminrandomly generated
20Admin 'blank'
21(blank)public
22(blank)211cmw91765
23adminnone
24D Link 25(blank)
25adminuser
26D-LinkD-Link
27admin(configured in setup)
28adminyear2000
29(blank)(see notes)
30public
31(label on the bottom of the router)
32(blank)(sticker on the bottom of the device)
33volcom751987197500
34n/aadmin
35adminpublic
36886124212421D
37(blank)0
38adminn/a
39administrator@*nigU^D.ha

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.10.1
5192.168.0.30
6192.168.8.254
710.90.90.91
810.1.1.1
9192.168.0.20
10192.168.15.1
1110.90.90.90
12192.168.0.35
13192.168.0.40
14192.168.0.101
15192.168.0.50:2000
16192.168.0.32
17192.168.0.10
18acquired via DHCP
19192.168.1.254
20192.168.229.61
21192.168.0.100
22193.168.1.150
23192.160.0.50
24192.168.2.1
25192.168.0.60
26192.168.1.
2710.255.255.1

Manuals for D-Link DIR-882

Quick Install Guide
Datasheet

Nothing of the methods worked for me and I still not get access to my D-Link !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.