D-Link DIR-320 rev A2 Default Router Login

To get access to your D-Link DIR-320 rev A2, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DIR-320 rev A2 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DIR-320 rev A2 Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
  • You should see 2 text fields where you can enter a username and a password.
  • Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DIR-320 rev A2 router default login

If above login credentials doesn't work with your D-Link DIR-320 rev A2 router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DIR-320 rev A2 wireless router.

# Username Password
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6(blank)
7n/an/a
8(blank)admin
9admin
10n/a(blank)
11useruser
12admintelus
13rootadmin
14(blank)private
15admin<blank>
16adminrandomly generated
17Admin 'blank'
18(blank)public
19admin 'randomly generated'
20C192.168.0.1
21adminroot
22adminyear2000
23(blank)(see notes)
24public
25(label on the bottom of the router)
26(blank)(sticker on the bottom of the device)
27volcom751987197500
28n/aadmin
29adminpublic
30886124212421D
31(blank)0
32adminn/a
33administrator@*nigU^D.ha
34(blank)211cmw91765
35adminnone
36D Link 25(blank)
37adminuser
38D-LinkD-Link
39admin(configured in setup)

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.8.254
5192.168.10.1
6192.168.0.30
710.90.90.91
810.1.1.1
9192.168.0.20
1010.90.90.90
11192.168.15.1
12192.168.0.35
13192.168.0.40
14192.168.0.10
15acquired via DHCP
16192.168.1.254
17192.168.0.101
18192.168.0.50:2000
19192.168.0.32
20193.168.1.150
21192.160.0.50
22192.168.2.1
23192.168.0.60
24192.168.1.
2510.255.255.1
26192.168.229.61
27192.168.0.100

Manuals for D-Link DIR-320 rev A2

Manual

Nothing of the methods worked for me and I still not get access to my D-Link !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.