D-Link DCS-936L camera Default Router Login

To get access to your D-Link DCS-936L camera, you need the IP of your device, the username and password. You'll find such information in the Manual of your D-Link DCS-936L camera router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

D-Link DCS-936L camera Login Guide

  • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
  • Type 192.168.0.20 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
  • You should see 2 text fields where you can enter a username and a password.
  • The default username for your D-Link DCS-936L camera is admin.
    The default password is (blank).
  • Enter the username & password, hit "Enter" and now you should see the control panel of your router.

D-Link DCS-936L camera router default login

If above login credentials doesn't work with your D-Link DCS-936L camera router then try this method

Try different ID/password combinations that are widely used by D-Link that you'll find below. In this list are the most popular default username and password combinations used by D-Link. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your D-Link DCS-936L camera wireless router.

# Username Password
1admin(blank)
2admin
3adminadmin
4(blank)(blank)
5adminpassword
6(blank)
7n/an/a
8(blank)admin
9admin
10n/a(blank)
11useruser
12admintelus
13(blank)private
14admin<blank>
15rootadmin
16(blank)public
17admin 'randomly generated'
18C192.168.0.1
19adminroot
20adminrandomly generated
21Admin 'blank'
22(blank)(see notes)
23public
24(label on the bottom of the router)
25(blank)(sticker on the bottom of the device)
26volcom751987197500
27n/aadmin
28adminpublic
29886124212421D
30(blank)0
31adminn/a
32administrator@*nigU^D.ha
33(blank)211cmw91765
34adminnone
35D Link 25(blank)
36adminuser
37D-LinkD-Link
38admin(configured in setup)
39adminyear2000

Default login IPs for my D-Link router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer D-Link. Maybe this will work for you.

# Default Router IP
1192.168.0.1
2192.168.0.50
3192.168.1.1
4192.168.8.254
5192.168.10.1
6192.168.0.30
710.90.90.91
810.1.1.1
9192.168.0.20
1010.90.90.90
11192.168.15.1
12192.168.0.35
13192.168.0.40
14acquired via DHCP
15192.168.1.254
16192.168.0.101
17192.168.0.50:2000
18192.168.0.32
19192.168.0.10
20192.168.2.1
21192.168.0.60
22192.168.1.
2310.255.255.1
24192.168.229.61
25192.168.0.100
26193.168.1.150
27192.160.0.50

Nothing of the methods worked for me and I still not get access to my D-Link DCS-936L camera!

All you need to do is to reset your DCS-936L camera modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.