Cisco WRVS4400N - Default login IP, default username & password

To get access to your Cisco WRVS4400N, you need the IP of your device, the username and password. You'll find such information in the Manual of your Cisco WRVS4400N router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is linksys-n .

Cisco WRVS4400N Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface.
You should see 2 text fields where you can enter a username and a password.
The default username for your Cisco WRVS4400N is admin.
The default password is admin.
Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Cisco WRVS4400N router default login

If above login credentials doesn't work with your Cisco WRVS4400N router then try this method

Try different ID/password combinations that are widely used by Cisco that you'll find below. In this list are the most popular default username and password combinations used by Cisco. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Cisco WRVS4400N wireless router.

#	Username	Password
1	Cisco	Cisco
2	admin	admin
3	(blank)	(blank)
4	admin	password
5	(blank)	Cisco
6	admin	(blank)
7	admin	changeme
8	root	attack
9	(blank)	admin
10	(blank)	riverhead
11		(blank)
12	sa	(blank)
13	ATTadmin	401!VEN
14	bbsd-client	changeme2
15	cusadmin	highspeed
16	admin	cisco
17	user	(blank)
18	Administrator	changeme
19	admin	1PTV-ADM1N
20	bbsd-client	NULL
21	Administrator	admin
22	admin	default
23	bubba	(unk)
24	cmaker	cmaker
25	admin	telstra
26	n/a	(blank)
27	netrangr	attack
28	(blank)	public/private/secret
29	superuser	superuser
30		c
31		ILMI
32	admin	system
33	hsa	hsadb
34	(blank)	_Cisco
35	root	blender
36	admin	W2402
37	(blank)	W2402
38	root	secur4u
39		cmaker
40	EAdmin<systemid>	(blank)
41	Admin123	Admin123
42	prixadmin	prixadmin
43	uwmadmin	password
44	admin	diamond
45	cusadmin	cusadmin
46	End User	7936
47		cable-docsis
48	admin	tsunami
49	admin
50	(blank)	233897301
51	(blank)	changeit

Default login IPs for my Cisco router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Cisco. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	10.10.10.1
4	10.0.0.1
5	192.168.1.245
6	192.168.100.1
7	192.168.1.254
8	acquired via DHCP
9	192.168.15.1
10	10.0.0.2
11	192.168.75.1/setup
12	192.168.1.115
13	10.1.10.1
14	192.168.0.0
15	192.168.10.10
16	10.128.128.128

Nothing of the methods worked for me and I still not get access to my Cisco WRVS4400N!

All you need to do is to reset your WRVS4400N modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.