Cisco Valet Plus M20 - Default login IP, default username & password

To get access to your Cisco Valet Plus M20, you need the IP of your device, the username and password. You'll find such information in the Manual of your Cisco Valet Plus M20 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. The default network name (SSID) is CiscoXXXXX .

Cisco Valet Plus M20 Login Guide

Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
You should see 2 text fields where you can enter a username and a password.
The default username for your Cisco Valet Plus M20 is admin.
The default password is admin.
Enter the username & password, hit "Enter" and now you should see the control panel of your router.

Cisco Valet Plus M20 router default login

If above login credentials doesn't work with your Cisco Valet Plus M20 router then try this method

Try different ID/password combinations that are widely used by Cisco that you'll find below. In this list are the most popular default username and password combinations used by Cisco. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Cisco Valet Plus M20 wireless router.

#	Username	Password
1	Cisco	Cisco
2	admin	admin
3	(blank)	(blank)
4	admin	password
5	admin	(blank)
6	(blank)	Cisco
7	admin	changeme
8	root	attack
9	(blank)	admin
10	(blank)	riverhead
11		(blank)
12	sa	(blank)
13	ATTadmin	401!VEN
14	bbsd-client	changeme2
15	cusadmin	highspeed
16	admin	cisco
17	user	(blank)
18	Administrator	changeme
19	admin	1PTV-ADM1N
20	bbsd-client	NULL
21	Administrator	admin
22	cmaker	cmaker
23	admin	telstra
24	n/a	(blank)
25	netrangr	attack
26	(blank)	public/private/secret
27	superuser	superuser
28		c
29		ILMI
30	admin	system
31	hsa	hsadb
32	(blank)	_Cisco
33	root	blender
34	admin	W2402
35	(blank)	W2402
36	root	secur4u
37		cmaker
38	EAdmin<systemid>	(blank)
39	Admin123	Admin123
40	prixadmin	prixadmin
41	uwmadmin	password
42	admin	diamond
43	cusadmin	cusadmin
44	End User	7936
45		cable-docsis
46	admin	tsunami
47	admin
48	(blank)	233897301
49	(blank)	changeit
50	admin	default
51	bubba	(unk)

Default login IPs for my Cisco router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Cisco. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	10.10.10.1
4	10.0.0.1
5	192.168.1.245
6	192.168.100.1
7	192.168.1.254
8	192.168.15.1
9	acquired via DHCP
10	10.0.0.2
11	192.168.75.1/setup
12	192.168.1.115
13	10.1.10.1
14	192.168.0.0
15	192.168.10.10
16	10.128.128.128

Manuals for Cisco Valet Plus M20

Manual

Nothing of the methods worked for me and I still not get access to my Cisco !

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.