CISCO Traffic Anomaly Detector Default Router Login

To get access to your CISCO Traffic Anomaly Detector, you need the IP of your device, the username and password. You'll find such information in the Manual of your CISCO Traffic Anomaly Detector router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router.

CISCO Traffic Anomaly Detector Login Guide

• Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
• Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
• You should see 2 text fields where you can enter a username and a password.
• The default username for your CISCO Traffic Anomaly Detector is (blank).
  The default password is riverhead.
• Enter the username & password, hit "Enter" and now you should see the control panel of your router.

If above login credentials doesn't work with your CISCO Traffic Anomaly Detector router then try this method

Try different ID/password combinations that are widely used by CISCO that you'll find below. In this list are the most popular default username and password combinations used by CISCO. Sometimes the username and password doesn't work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your CISCO Traffic Anomaly Detector wireless router.

#	Username	Password
1	Cisco	Cisco
2	admin	admin
3	(blank)	(blank)
4	admin	password
5	admin	(blank)
6	(blank)	Cisco
7	root	attack
8	admin	changeme
9	Administrator	admin
10	(blank)	admin
11	(blank)	riverhead
12		(blank)
13	sa	(blank)
14	ATTadmin	401!VEN
15	bbsd-client	changeme2
16	cusadmin	highspeed
17	admin	cisco
18	user	(blank)
19	Administrator	changeme
20	admin	1PTV-ADM1N
21	bbsd-client	NULL
22	admin	tsunami
23	admin
24	(blank)	233897301
25	(blank)	changeit
26	admin	default
27	bubba	(unk)
28	cmaker	cmaker
29	admin	telstra
30	n/a	(blank)
31	netrangr	attack
32	(blank)	public/private/secret
33	superuser	superuser
34		c
35		ILMI
36	admin	system
37	hsa	hsadb
38	(blank)	_Cisco
39	root	blender
40	admin	W2402
41	(blank)	W2402
42	root	secur4u
43		cmaker
44	EAdmin<systemid>	(blank)
45	Admin123	Admin123
46	prixadmin	prixadmin
47	uwmadmin	password
48	admin	diamond
49	cusadmin	cusadmin
50	End User	7936
51		cable-docsis

Default login IPs for my CISCO router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer CISCO. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	10.10.10.1
4	10.0.0.1
5	192.168.1.245
6	192.168.100.1
7	192.168.1.254
8	acquired via DHCP
9	192.168.15.1
10	10.128.128.128
11	10.0.0.2
12	192.168.75.1/setup
13	192.168.1.115
14	10.1.10.1
15	192.168.0.0
16	192.168.10.10

Nothing of the methods worked for me and I still not get access to my CISCO Traffic Anomaly Detector!

All you need to do is to reset your Traffic Anomaly Detector modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.