192.168.1.200 Default Router IP Login

It's default login IP that is reserved for modems or wireless routers. By typing 192.168.1.200 in the address bar of your browser you will get access to the admin interface of your router. 192.168.1.200 is mostly used by brands like Loopcomm, TRENDnet or Linksys . It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were used to access your Wireless Router, Wireless Range Extender or access point, bridge, repeater control panel. Such a standard IP is also called Default Gateway IP.

Not many people know their router IP because in most cases there is only one situation you need the IP 192.168.1.200. That is while the setup proccess executed by a technician. So you never get in contact with 192.168.1.200. But sometimes you want to change the SSID (WiFi network name), the WiFi-Password or the parental controls. Then you need the IP 192.168.1.200. After logging into your router you'll see the navigation panel where you are able to manage the data traffic, see statistics and configure the router settings.

Where is the login page for 192.168.1.200 ?

192.168.1.200 You simply need to input http://192.168.1.200 in your browser and you will be directed to the login page for your admin panel.

192.168.1.200 login page

If you are not sure of your password or you encounter a wrong match on your password, you can just reset the modem to factory settings.

192.168.1.200 default username password

Resetting the password for 192.168.1.200 ?

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

192.168.1.200 router reset

What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. If you have not enough information, we recommended that you should get help from someone who has that kind of knowledge.

Default username & password combinations for devices that use 192.168.1.200 as their default IP address

This list will show you the most used default usernames and passwords for the device IP 192.168.1.200.

# Username Password
1n/a
2adminadmin
3superusersuperu
4admin1234
5(blank)admin

Router models that use 192.168.1.200 as their default IP

TRENDnet TPL-210AP
Wireless Access Point
Default username: admin
Default password: admin
Hawking HW2R1
Wireless Range Extender
Default username: admin
Default password: 1234
Loopcomm LP-2026
Wireless Router
Default username:
Default password: n/a
Loopcomm LP-2036
Wireless Router
Default username:
Default password: n/a
Loopcomm R1
Wireless Router

Linksys WPG54G
media player, screen sharer, hardware PowerPoint machine
Default username: (blank)
Default password: admin
Loopcomm LP-7316H
access point, bridge, repeater
Default username: admin
Default password: admin
TRENDnet TK-IP101

Default username: superuser
Default password: superu