192.168.0.101 Default Router IP Login

It's default login IP that is reserved for modems or wireless routers. By typing 192.168.0.101 in the address bar of your browser you will get access to the admin interface of your router. 192.168.0.101 is mostly used by brands like Netgear, D-Link or Dlink . It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1 or 192.168.2.1 that were used to access your Powerline Access Point, access point, NAS or Powerline Access Point control panel. Such a standard IP is also called Default Gateway IP.

Not many people know their router IP because in most cases there is only one situation you need the IP 192.168.0.101. That is while the setup proccess executed by a technician. So you never get in contact with 192.168.0.101. But sometimes you want to change the SSID (WiFi network name), the WiFi-Password or the parental controls. Then you need the IP 192.168.0.101. After logging into your router you'll see the navigation panel where you are able to manage the data traffic, see statistics and configure the router settings.

Where is the login page for 192.168.0.101 ?

192.168.0.101 You simply need to input http://192.168.0.101 in your browser and you will be directed to the login page for your admin panel.

192.168.0.101 login page

If you are not sure of your password or you encounter a wrong match on your password, you can just reset the modem to factory settings.

192.168.0.101 default username password

Resetting the password for 192.168.0.101 ?

All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

192.168.0.101 router reset

What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. If you have not enough information, we recommended that you should get help from someone who has that kind of knowledge.

Default username & password combinations for devices that use 192.168.0.101 as their default IP address

This list will show you the most used default usernames and passwords for the device IP 192.168.0.101.

# Username Password
1adminpassword
2admin(blank)

Router models that use 192.168.0.101 as their default IP

SerComm IP822LM
Powerline Access Point
Default username: admin
Default password: (blank)
Netgear WGX102

Default username: admin
Default password: password
D-Link DNS-120

Default username: admin
Default password: (blank)
Netgear WGXB102 AP-Mode

Default username: admin
Default password: password
Netgear WGXB102 Router-Mode

Default username: admin
Default password: password
Dlink DNS-120

Default username: admin
Default password: (blank)
D-Link DNS-120 rev A2
NAS
Default username: admin
Default password: (blank)
Netgear WGX102v2
Powerline Access Point, access point
Default username: admin
Default password: password
Netgear WGX102v1
Powerline Access Point, access point
Default username: admin
Default password: password
Netgear WGX102 AP

Default username: admin
Default password: password